| 2003 Seattle Annual Meeting (November 2–5, 2003) | |
| Paper No. 87-7 | |
| Presentation Time: 8:00 AM-12:00 PM | ||
STRATIGRAPHIC ARCHITECTURE OF THE UPPER CRETACEOUS WILLIAMS FORK FORMATION, PICEANCE BASIN, WESTERN COLORADO THROUGH OUTCROP STUDIES AND HIGH-RESOLUTION LIDAR IMAGING | ||
|
ELLISON, Amanda I.1, PRANTER, Matthew J.1, COLE, Rex2, and PATTERSON, Penny E.3, (1) Geological Sciences, Univ of Colorado, Boulder, CO 80309-0399, Amanda.Ellison@colorado.edu, (2) Physical and Environmental Sciences, Mesa State College, P.O. Box 2647, Grand Junction, CO 81502-2647, (3) ExxonMobil Upstream Rsch Co, Houston, TX 77252-2189 The Upper Cretaceous (Campanian) Williams Fork Formation in the Piceance basin of western Colorado is a major source of unconventional gas, as well as an important regional aquifer. Although fractures control fluid flow in many of these reservoirs within the basin, the stratigraphic architecture of these fluvial deposits significantly affects drainage patterns and fluid storage. These factors are directly associated with the distribution and connectivity of sandbodies, especially in low to moderate net:gross (<40%) fluvial systems similar to the Williams Fork Formation. This outcrop-based study addresses the connectivity, geometry, stacking, and internal heterogeneities of fluvial channels at the reservoir scale using conventional field methods, high-resolution lidar imaging, and 3-D outcrop modeling. The stratigraphic analysis of the Lower Williams Fork Formation is conducted on well-exposed and accessible outcrops within Coal Canyon, near Grand Junction, Colorado. Various fluvial elements from outcrop are examined and described in detail and include channels, splays, and meander-bend point bars. Detailed measured sections and outcrop correlation panels capture the variation of channel geometry, stacking, and internal sedimentology that is associated within the fluvial deposits. Lidar (LIght Detection And Ranging) data collected at well-exposed channel and point-bar sandstone outcrops provide detailed 3-D images of the outcrop. The centimeter-scale resolution that Lidar images provide are used to define fluvial elements and bounding surfaces, and to extract dimensional data from sandstone bodies. Using a combination of outcrop photomosaics and interpreted Lidar images, statistical methods are used to evaluate sandstone architecture and connectivity. The quantitative information on sandstone connectivity and geometry are useful to constrain 3-D geologic models of analogous subsurface reservoirs. | ||
|
2003 Seattle Annual Meeting (November 2–5, 2003)
| ||
| Session No. 87--Booth# 148 Sediments, Clastic (Posters) I Washington State Convention and Trade Center: Hall 4-F 8:00 AM-12:00 PM, Monday, November 3, 2003 Geological Society of America Abstracts with Programs, Vol. 35, No. 6, September 2003, p. 172 | ||
© Copyright 2003 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions. | ||