RESIDENCE TIMES IN CARBONATE AQUIFERS USING ENVIRONMENTAL AND INJECTED TRACERS

There has been widespread use of tracers in carbonate aquifers to measure groundwater velocities and travel times. Injected tracers have largely been used to measure travel times from sinking streams to springs. Environmental tracers have largely been used to estimate overall residence times in an aquifer, and give times that are typically one hundred times longer than estimates from injected tracers. Use of both environmental and injected tracers has enabled residence times and storage volumes to be calculated for both diffuse and conduit components in a number of aquifers. With the addition of permeability data it is possible to calculate storage and flow components for the matrix, fracture and channel components. Results from several aquifers show that the matrix of the rock provides almost all storage but has very long residence times, especially in older carbonates. Channels provide little storage, account for most of the flow, and have very short residence times. Fractures play an intermediate role between the matrix and channels and have low storage and moderate residence times. These same contrasts are found in many contrasting aquifers and are likely to be found in all unconfined carbonate aquifers. Thus these aquifers are marked not so much by ranging from conduit flow to diffuse flow types but rather in having triple porosity with contrasting flow and storage properties in the matrix, fractures and channels. The combination of environmental and injected tracers provides a powerful tool for elucidating these contrasting properties.