THE MOVEMENT OF RADIONUCLIDES IN CRYSTALLINE BEDROCK AT THREE NUCLEAR POWER PLANT SITES IN NEW ENGLAND
Groundwater modeling was used first to integrate the site characterization work developed from field mapping, borings and monitoring wells, testpits, remote sensing, and geophysics. Where possible, groundwater modeling was used to reproduce measured water levels on the site in both transient and steady-state conditions, and reproduce known radioactive plume development. Modeling was used to predict the future radioactive plume fate and transport under various scenarios such as pumping on the far side of major water bodies that separate the plant site from residential areas. Modeling was used to decide how much contaminated soil and rock had to be removed to result in a plume that did not exceed regulatory standards. Modeling has been relied upon heavily in the design of the long-term groundwater monitoring systems.
We used 3-D porous media models incorporating both soil and bedrock and adapted them for use in modeling both generalized plume movement in bedrock as well as discrete fracture zones that were identified or inferred. This presentation will describe the nature and extent of several radionuclide plumes in bedrock, how the bedrock fracture system was characterized as to both its flow system and its geochemical transport system, and how remediation has conducted to reduce source terms.