2008 Joint Meeting of The Geological Society of America, Soil Science Society of America, American Society of Agronomy, Crop Science Society of America, Gulf Coast Association of Geological Societies with the Gulf Coast Section of SEPM
Paper No. 142-4
Presentation Time: 8:00 AM-4:45 PM

Cyber Techniques Used to Produce Physical Geological Models

REYES, Reuben1, BELLIAN, Jerome A.1, DUNLAP, Dallas B.1, and EUSTICE, Rachel A.2, (1) Jackson School of Geosciences, Bureau of Economic Geology, The University of Texas at Austin, University Station, Box X, Austin, TX 78713-8924, reuben.reyes@beg.utexas.edu, (2) Austin, TX 78723

Computer applications used for producing and displaying digital 3D models are complex and require many hours of training to use. Because of this, we explored using different digital techniques to produce 3D physical models. These models can be used independently or can be used to enhance virtual models. The models we produced represent real geological data from seismic, X-ray computed tomography, and point cloud lidar sources. For each data set, a different 3D physical technology was used to produce the model. The seismic data is represented by an interlocking color model, with each color used to show a different seismic attribute. A translucent 3D model showing cavities and vugs within a limestone was produced from X-ray computed tomography data. The last model represents cave geometry and was produced by replicating a lidar point cloud in clear crystal glass. All three physical models or replicas accurately portray the complex data, yet are scaled so they are small enough to hold. New advances in 3D printing and computer technology allow scientists to produce 3D models from a wide variety of geological data rapidly to use for teaching and research. These new techniques allow a fast turn around time between gathering geological data and producing a 3D physical model.

2008 Joint Meeting of The Geological Society of America, Soil Science Society of America, American Society of Agronomy, Crop Science Society of America, Gulf Coast Association of Geological Societies with the Gulf Coast Section of SEPM
General Information for this Meeting
Session No. 142--Booth# 41
Geoinformatics (Posters)
George R. Brown Convention Center: Exhibit Hall E
8:00 AM-4:45 PM, Sunday, 5 October 2008

Geological Society of America Abstracts with Programs, Vol. 40, No. 6, p. 136

© Copyright 2008 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.