|2008 Joint Meeting of The Geological Society of America, Soil Science Society of America, American Society of Agronomy, Crop Science Society of America, Gulf Coast Association of Geological Societies with the Gulf Coast Section of SEPM|
|Paper No. 156-11|
|Presentation Time: 8:00 AM-4:45 PM|
Quantitative Analysis of Li by Laser Induced Breakdown Spectroscopy
HANSON, Austin1, MCMILLAN, Nancy J.1, and WISE, Michael2, (1) Geological Sciences, New Mexico State University, Box 30001, MSC 3AB, Las Cruces, NM 88003, firstname.lastname@example.org, (2) Mineral Sciences, NMNH, Smithsonian Institution, 10th St. & Constitution Ave. N.W, Washington, DC 20560-119|
Lithium is currently difficult to analyze because it cannot pass through windows necessary in vacuum systems. However, analysis of Li is necessary, due to its petrological importance. Laser-induced breakdown spectroscopy (LIBS) is very sensitive to Li concentrations, and could possibly be a tool for Li analysis. The laser in LIBS ablates the surface of the specimen, generating a short-lived plasma, which puts the atoms and ions into an excited state. Photons are emitted when electrons return to a lower energy level, which are captured by a spectrometer, and finally displayed on a computer. In this study, standards for the Li calibration consist of synthetic glasses prepared from lithium tetraborate, sodium tetraborate, and pure SiO2 powders that were placed in graphite crucibles in a furnace at 1100°C for 30 min. The standards were analyzed at a laser power of 91.5 mJ, and at a Q-Switch delay of –1.5 µm using an Ocean Optics LIBS 2500 system. Spectra were analyzed using multivariate analysis and the program Unscrambler. Multivariate analysis uses the entire spectrum to calibrate to each element, overcoming matrix effects that complicate single-element calibrations. The multivariate analysis resulted in a excellent calibration of known value vs. predicted value (r²=0.99988). To test this, a set of standard spectra not used in the calibration were analyzed; a plot of known vs. measured values yielded r²=0.927. Two lepidolites and two spodumenes of unknown Li concentrations were analyzed with the calibration, resulting in reasonable Li concentrations of 4.76 and 2.70 wt % Li (spodumene) and 3.68 and 4.33 wt % Li (lepidolite). These results suggest that LIBS can be developed to routinely analyze Li in rock and mineral samples using simple synthetic standards.
2008 Joint Meeting of The Geological Society of America, Soil Science Society of America, American Society of Agronomy, Crop Science Society of America, Gulf Coast Association of Geological Societies with the Gulf Coast Section of SEPM
General Information for this Meeting
|Session No. 156--Booth# 299|
Real-Time, In-Field Geochemical Analysis: Current Capabilities and Future Prospects (Posters)
George R. Brown Convention Center: Exhibit Hall E
8:00 AM-4:45 PM, Sunday, 5 October 2008
Geological Society of America Abstracts with Programs, Vol. 40, No. 6, p. 176
© Copyright 2008 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.