|2011 GSA Annual Meeting in Minneapolis (9–12 October 2011)|
|Paper No. 62-1|
|Presentation Time: 1:40 PM-1:55 PM|
GEOLOGY AND HYDROGEOLOGY OF PRAIRIE BURIED VALLEYS
SHARPE, David R., Geological Survey of Canada, 601 Booth St, Ottawa, ON K1A 0E8, Canada, firstname.lastname@example.org, CUMMINGS, Don I., DC Geoscience, 12 Rue Décarie, Gatineau, QC J9H 2M3, Canada, and RUSSELL, Hazen A.J., Geological Survey of Canada, 601 Booth Street, Ottawa, ON K1A 0E8, Canada|
Buried valleys (BVs) in Canadian Prairies are sediment-filled incised valleys eroded into low-permeability, poorly-consolidated bedrock, typically Cretaceous shale, and blanketed by low-permeability, mud-rich glacial diamicton. Many contain aquifers and they are important sources of groundwater for drinking, agriculture, mining, and sustaining surface-water fluxes.
The origin of BVs is inferred as either; 1) glaciofluvial erosion by meltwater flowing beneath or in front of glaciers, or, 2) fluvial erosion during the late Tertiary (i.e., prior to Quaternary glaciation) by rivers flowing north-eastward from Rocky Mountains via Hudson Bay to the Labrador Sea. It is possible that many larger valleys are not the result of a single formative process. Buried valleys occur across the Prairies, with lengths ~1- 300 km, widths ~0.5-30 km and depths ~10-180 m. Inferred glaciofluvial BVs have width-to-depth ratios of less than 10:1, whereas inferred pre-glacial (fluvial) BVs generally have width-to-depth ratios greater than 10:1. Sparse regional data suggest that Prairie BVs slope 0.5 to ~5 m per kilometre along their lengths, commonly parallel to regional bedrock slope. However, large Spiritwood and Hatfield buried valleys, two important Prairie aquifer systems, exhibit no obvious slope over hundreds of kilometres using a modern day datum.
Prairie buried-valley fills tend to be heterogeneous and display complex architectures. Sand, gravel, mud and diamicton are common components and any one can dominate the fill sequence. Variability in BV fill and geometry, and irregularity of the valley floor may result in flow barriers, which complicate resource assessment and sustainable development.
Prairie BVs have distinct geological characteristics that can be related to their hydrogeological properties. Low permeability shale tends to underlie buried-valley aquifers and thick (many 10s of m) low-permeability till and glacial lake mud tend to overlie them. This reduces or prevents recharge to buried-valley aquifers, thus protecting groundwater resources from contamination and from hydrologic stress. Low-permeability settings tend to lead to groundwater chemistries that are intermediate between those of groundwater in bedrock and till.
2011 GSA Annual Meeting in Minneapolis (9–12 October 2011)
General Information for this Meeting
|Session No. 62|
Buried Valley Aquifers: What Do We Know and How Do We Move Forward for Sustained Groundwater Management?
Minneapolis Convention Center: Room M101AB
1:30 PM-5:30 PM, Sunday, 9 October 2011
Geological Society of America Abstracts with Programs, Vol. 43, No. 5, p. 171
© Copyright 2011 The Geological Society of America (GSA), all rights reserved. Permission is hereby granted to the author(s) of this abstract to reproduce and distribute it freely, for noncommercial purposes. Permission is hereby granted to any individual scientist to download a single copy of this electronic file and reproduce up to 20 paper copies for noncommercial purposes advancing science and education, including classroom use, providing all reproductions include the complete content shown here, including the author information. All other forms of reproduction and/or transmittal are prohibited without written permission from GSA Copyright Permissions.